Email for Best Price!

GT-2680

Print PDF
$18,950.00

Features

  • ISO 9001 certified

  • Large spindle bore 4-1/8”

  • Adjustable mechanical spindle clutch for spindle start Forward/reverse and
    brake, spindle brake without stop the spindle motor to longer motor 8 times life
    than most other Brand lathe with electrical start/stop.

  • 4-way rapid traverse on Longitudinal and cross ways

  • All dual inch/metric dials.

  • Solid cast iron machine base

  • Heavy Duty guideway width 15-1/2”

  • Heavy Duty main motor 15 HP

  • 12 spindle speeds from 36-1,600 rpm

  • Oil pump on apron for all ways and leadscrews

  • Threading and feeding rate change without changing gears

  • Spindle is balanced, hardened and precision ground

  • Spindle is supported at 3-point by high precision bearings

  • All gears and shafts are hardened and precision ground

  • Guideways induction hardened and precision ground

  • Automatic lubrication system in headstock and feed box

  • One year warranty for parts

Standard Equipment

  • Free Taper turning attachment, , installed

  • 12” 3-jaw chuck with top reversible jaws

  • 20” 4-jaw chuck with top reversible jaws

  • 25” Face plate

  • 10” drive plate

  • 4-3/4” – 10-1/4” large steady rest with roller jaws

  • 1”-3” follow rest

  • Removable gap

  • 4-way tools post

  • Foot brake

  • Halogen Work light

  • Coolant system

  • Oil pump on apron for lubrication to all ways and leadscrews

  • Section splash guard on Apron

  • (2) dead centers and (1) reducing sleeve

  • Thread chasing dial

  • Tool box

  • Full length rear splash guard for GT-2680 only
  • Section splash guard on Apron for GT-26120 only

Optional Equipment for Heavy Duty Lathes

  • DRO for #GT-26120, NEWALL (England), 2 axis, free install

  • DRO for #GT-2680, NEWALL (England), 2 axis, free install

  • 5-C Hand lever type collet closer, “JFK” USA, free install

  • 33 pc 5C collet set, from 1/16 to 1-1/16” by 32ndth, # 900-0014

  • 6pc Aloris type quick change tool post #900-0051-400(wedge)

  • Live center for tailstock MT# 5, part# 900-0050-05

  • 5pc Indexable carbide turning set # 2003-0005

  • 3/8” carbide insert # 2003-0014

SPECIFICATIONS
Model GT-2680 GT-26120
Net weight, approx 8,700 LBS Super Heavy Duty
9,500 LBS
Max. swing over bed 26”
Max. length of workpiece 80” 120”
Max. swing over cross slide 16-1/2”
Max. Swing in gap 34-1/4”
Width of Bed 15-1/2”
Effective length in gap to spindle 9”
Effective length in gap to chuck jaws 6”
Spindle bore D1-8 . 4-1/8”
Taper of spindle center MT6
Spindle speeds 36-1,600 rpm / 12 steps
Longitudinal feeds 0.0023-0.093 IPR, 65 kinds
Cross feeds 0.0011-0.04 IPR, 65 kinds
Inch threads 13 & 28-2 TPI, 27 kinds-  28,14,7,3-1/2, 27, 24, 12, 6, 3, 22, 11, 5-1/2, 2-3/4< 20, 10, 5, 2-1/2, 18,9,4-1/2, 2-1/4, 16, 8, 4, 2, 11-1/2, 19
Metric threads 1-14 mm , 22 kinds
Module threads 0.5-7 mm, 18 kinds
Diameter pitch threads 56-4 DP , 24 kinds
Max. travel of top slide 5-3/4”
Max. travel of cross slide 14”
Longitudinal rapid traverse 18 ft / min
Cross rapid traverse 8 ft / min
Diameter of tailstock quill 3”
Max. travel of tailstock quill 6”
Taper of tailstock quill center M.T. # 5
4-way tool post size 1” x 1”
Longitudinal leadscrew diameter / pitch Diameter:   1-5/8""-Pitch: 1-5/8 TPI
Main Motor 15 HP, 220V/440V, 3 phase, prewired on 220V
Rapid traverse motor 1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor 1/8 HP,220V/440V, 3 phase, prewired on 220V
Overall dimensions, LxWxH 142” x 45” x 58” 182” x 45” x 58”

Please Request a Quote